軟管泵工作原理
Working Principle of Hose Pump
軟管泵工作時，轉子體旋轉，轉子體上的1對壓輥沿著1根特制的膠管旋轉，壓輥與泵殼產生的擠壓力將膠管壓扁，在管子自身彈性和側導輥的強制下，通過恢復原狀產生的真空吸入液體，液體在壓輥的機械擠壓下從管內排出，這樣往復循環(huán)。該泵結構簡單，制作容易。泵的耐久性主要決定于管子的彈性和耐腐蝕性，其流量與電動機的轉速和管子內徑大小有關，所以，關鍵在于選擇管子和轉速調控機構，只要管子有足夠長的壽命、轉速穩(wěn)定，長期保持定量輸送是沒有蓋土網 防寒布 麻繩 油麻繩 麻刀 瀝青麻繩 靜壓造型線 自動澆注機 鑄鐵拍門 鋼制拍門 玻璃鋼拍門問題的。
When the hose pump works, the rotor body rotates, and a pair of pressure
rollers on the rotor body rotate along a special rubber tube. The
extrusion force produced by the pressure rollers and the pump shell
flattens the rubber tube. Under the force of the elasticity of the tube
itself and the side guide roll, www.jinggaimoju.net.cn
www.hupomoju.com.cn www.biaozhizhuang.net.cn www.jianchajing.org.cn
www.shipindai.net.cnthe liquid is sucked into the tube through the
vacuum generated by restoring the original state, and the liquid is
discharged from the tube under the mechanical extrusion of the pressure
roll, thus reciprocating. The pump has simple structure and easy
fabrication. The durability of the pump mainly depends on the elasticity
and corrosion resistance of the pipe. Its flow rate is related to the
speed of the motor and the diameter of the pipe. Therefore, the key is
to select the pipe and speed control mechanism. As long as the pipe has a
long life and stable speed, it is no problem to maintain long-term
quantitative transmission
